Trending September 2023 # Anycubic Kobra Neo 3D Printer Hands # Suggested October 2023 # Top 14 Popular |

Trending September 2023 # Anycubic Kobra Neo 3D Printer Hands # Suggested October 2023 # Top 14 Popular

You are reading the article Anycubic Kobra Neo 3D Printer Hands updated in September 2023 on the website We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested October 2023 Anycubic Kobra Neo 3D Printer Hands

Anycubic Kobra Neo 3D Printer Hands-on Review Anycubic Kobra Neo is an affordable but sturdy 3D printer




If you’re a maker, Anycubic Kobra Neo is an affordable but sturdy 3D printer that will get you started.

It’s easy to assemble and all the tools required are provided in the package.

The 3D printer has a

LeviQ auto-leveling

feature that is great for beginners and seasoned users as well.



To fix Windows PC system issues, you will need a dedicated tool

Fortect is a tool that does not simply cleans up your PC, but has a repository with several millions of Windows System files stored in their initial version. When your PC encounters a problem, Fortect will fix it for you, by replacing bad files with fresh versions. To fix your current PC issue, here are the steps you need to take:

Download Fortect and install it on your PC.

Start the tool’s scanning process to look for corrupt files that are the source of your problem

Fortect has been downloaded by


readers this month.

3D printers are now a must tool for makers and the ones who are passionate about DIY.

There are more 3D printer types but the most affordable are the plastic extruding printers.

We’ve tested the Anycubic Kobra Neo, one of the most affordable of its kind but, as you will see below, it does a pretty good job.

The Anycubic Kobra ships in a semi-assembled state and doesn’t require any decent experience and knowledge to put it together. This provides a beginner-friendly assembly experience.

In this article, we’re going to talk about the 3D printer’s installation, features, software, and how you can actually use it.

What are Anycubic Kobra Neo’s technical specifications?

First, let’s overview Anycubic Kobra Neo’s characteristics:

Leveling25-point automatic levelingPrinting platform8.7 x 8.7 inches / 22 x 22 cmPrinting materialPLA / ABS / PETG & TPUNozzle sizeø 0.4 mm (replaceable)Nozzle temperature≤ 500 °F / 260 °CHot bed temperature≤ 230 °F / 110 °CPrinting speed≤10cm/s (Max speed)Control panel2.4″ LCD screen with a control knobZ-axisSingle threaded rodPrinting dimensions25x22x 22 cm (HWD)Machine dimensions49.0 x 44.5 x 44.3 cm

Although it’s easy to look at the technical specifications to know what you’re dealing with, we need to mention some features that you usually don’t get from such an affordable 3D printer.

What are the best features of Anycubic Kobra Neo? 1. Easy automatic leveling with inductive sensor

The most important aspect of a 3D printer is to keep everything smooth and precise and the LeviQ 25-point auto-leveling technology makes things a lot easier for beginner users.

Manual leveling is time-consuming and requires decent experience and judgment. With the automatic leveling, you just select the calibration from the menu and in just a few minutes, the printer is ready for the job.

2. Double-sided PEI Spring Steel sheet

The heated printing platform is covered with a double-sided magnetic sheet that is wear-resistant, less breakable, and bendable.

Textured PEI beds make part removal easier because prints will stick to less surface area than on a smooth sheet, and the dips and highs of the bed will force the parts to pop off once the bed cools down.

So you can easily remove the prints, even the larger or more sticky PETG prints.

3. Direct Drive Extruder

The extruder is included in the print head and the Direct Drive system feeds the filament to the extruder at the right pace for constant flow during the printing process.

This way, you don’t need to worry about any filament entanglement and the finished print will be a lot more accurate.

Moreover, the printer also comes with a filament unloading option that pulls out the thread after you’re done printing.

4. 2.4-inch knob control LCD screen

The Kobra Neo also comes with a 2.4’’ knob-control LCD screen. The display is an easy-to-read display and the knob helps you navigate the menu system.

Truth be told, we were a bit surprised that it wasn’t a touchscreen but the push-knob was extremely convenient to use and we could perform all the actions quickly.

➡ High printing speed – Kobra Neo prints at a typical speed of 6cm/s and reaches 10cm/s at its highest speed which is not bad at all within the industry standards

Now that we know about its most important features, let’s see how we can actually assemble and use Anycubic Kobra Neo.

How do I use the Anycubic Kobra Neo 3D printer? 1. Anycubic Kobra Neo package and assembly

Everything comes packed safely, all the parts are protected by plastic foam so we didn’t find any pieces affected by transport although the box was sent all the way from China.

First of all, you should know that all the tools you need for the assembly and set-up of the printer are provided in the box.

Anycubic even included the SD card and USB flash drive with the software and user manual for the device.

Expert tip:

Mounting the frame on the base with 4 screws, another 4 screws to mount the printing head on the frame, and another screw to mount the X-axis limit switch.

The last part is to mount the 2.4-inch screen with another 2 screws on the right side of the base.

2. Anycubic Kobra Neo set-up and printing

After you finish installing all the components, look at the back of the printer and make sure that the power supply is set up for the right voltage available in your country (110V or 220V).

Now, plug the power cord into the printer and outlet, then turn on the device.

The screen will turn on. Turn the knob until you highlight the Menu, then press the knob.

Turn the knob to reach Leveling and press the knob, then select Automatic leveling.

The printer has a 25 points automatic leveling technology and the process will take a few minutes.

After the process is done, you will see that on the screen.

Now, cut the PLA filament to a 45-degree angle with the cutter from the package.

Pull the lever on the print head, then insert the filament all the way down in the orifice.

Now, insert the SD card provided with the package in the slot from the lower right part of the printer base.

Rotate the screen knob to get to Menu, then select Print from SD card and press the knob.

You will see that you already have a small 3D model on the SD card which is perfect for testing your printer.

After you select it, the nozzle will heat up and when it reaches the right temperature, the printing will start.

3. Printing 3D models from your PC

After you start the printing, it will take a few minutes for the nozzle to reach the correct temperature. And within the software, you will be able to monitor the printing process, view the elapsed and estimated time for printing.

What were the Anycubic Kobra Neo printing results?

First, we chose a small 3D model to see how things work out. It took about 45 minutes to print. If you’re new to 3D printing, you should know that the machine doesn’t only print the 3D model itself.

It needs a base, a support structure that you need to remove after the printing is finished.

Finished print and after a little bit of sanding

In the image above, on the left, you can see how the model looked right after finishing printing. On the right, we removed the excess support material and sanded the model a little bit.

Also, you should know that the Cura software is only a slicer, a program that breaks the model into layers so that the printer knows how to build the structure.

If you want to create your own objects, you will need a 3D modelling software and save your work in SLT or 3MF format. The software and printer support a lot of other formats, but these are the most used.

Next, we switched to a full-blown skeleton hand that turned out amazing, but it took about 5 hours to complete.

The skeletal hand could be used as study material

The image above was taken after removing the support PLA and sanding, but the whole process was smooth and uneventful.

The maximum print sizes are 250 x 220 x 220 mm and a print volume of maximum 12.1 liters

We also got a large roll of silver color PLA, and we found a much larger model to try it out on.

The idea was to test the actual largest printing object that we could create with Anycubic Kobra Neo and we were not disappointed.

It took approximately 12 hours to print but after removing the scaffolding and sanding it looked amazing.

How do I get Anycubic Kobra Neo and what is its price?

It’s going to be a shocker but this 3D printer is priced at only $249 and it’s available for ordering straight from the manufacturer’s website.

Actually, if you hurry ups, there’s even an offer with extra $20 off sitewide $100+ order via PayPal Pay. Just use the code PAYPAL when you order to benefit from this deal.

⇒ Get Anycubic Kobra Neo

Pros Simple and easy installation Anycubic LeviQ auto-leveling All the tools for installation are included High volume printing dimmensions High printing speed Cons It doesn’t come with a protection cover No wireless connectivity Verdict

For this price, Anycubic Kobra Neo is really a remarkable tool. It’s very easy to assemble even for a beginner and it feels sturdy enough for any build.

The auto-levelling feature took all the pain away from any manual tweaking and the fact that absolutely all the required tools were inside the package helped a lot.

We only discovered a few downsides, the lack of wireless connectivity and the absence of a USB cable for connection.

However, for this small price, the provided SD card is more than enough to load up your 3D models.

Speaking of models, you might be interested in the best STL file software for 3D printing because you will need them to start creating.

Still experiencing issues?

Was this page helpful?


Start a conversation

You're reading Anycubic Kobra Neo 3D Printer Hands

Update the detailed information about Anycubic Kobra Neo 3D Printer Hands on the website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!